Karimi, Behnam, and Yusuf Altintas. "Hybrid modeling of position-dependent dynamics of thin-walled parts using shell elements for milling simulation." Journal of Manufacturing Science and Engineering 144.8 (2022): 081014.

Xiao J L , Zhang Q Y , Liu H T ,et al.Research on vibration suppression by a multi-point flexible following support head in thin-walled parts mirror milling[J].International Journal of Advanced Manufacturing Technology, 2020, 106(2).

Li, XiangFei, et al. "A review of recent advances in machining techniques of complex surfaces." Science China Technological Sciences 65.9 (2022): 1915-1939.

Bao, Yan, et al. "Model for surface topography prediction in mirror-milling of aircraft skin parts." The International Journal of Advanced Manufacturing Technology 95 (2018): 2259-2268.

Cui Huiting, Chen Weifang, Feng Ting. Research on clamping optimization to suppress vibration in thin-walled parts processing [J]. Combined Machine Tools and Automated Processing Technology, 2016, (5): 138-142.

Li Liang. Processing vibration analysis and processing technology research of thin-walled parts [D]. Nanjing University of Aeronautics and Astronautics, 2005.

Zhang Jun, Li Tianyun, Zhu Xiang, et al. Analysis of self-vibration characteristics of complex-shaped planar thin plates based on the improved Rayleigh-Ritz method [J]. Vibration and Impact, 2019, 38(19): 45-51

Wan Chunbo, Ju Changyu, Zhang Yibo, etc. Research on chatter stability prediction in thin-walled parts milling [C]//China Association for Science and Technology Aviation Engine Industry-Academic Consortium, China Aerospace Power Federation. The 6th Aerospace Power Federation Proceedings of the Conference and the 42nd Technical Exchange Conference of the Third Professional Information Network of China Aerospace Industry (Volume 7). Beijing Institute of Power Machinery; Northeastern University, 2022:11.

Arnaud L , Gonzalo O ,Sébastien Seguy,et al.Simulation of low rigidity part machining applied to thin-walled structures[J].International Journal of Advanced Manufacturing Technology, 2011, 54(5-8):479-488.

Bo Q , Liu H , Lian M ,et al.The influence of supporting force on machining stability during mirror milling of thin-walled parts[J].Springer London, 2019(9).