Volume 4, Issue 3
Department of Bone, Joint and Sports Medicine, Hunan Provincial People's Hospital (First Affiliated Hospital of Hunan Normal University), Changsha 410005,Hunan Province, China
Published： 15 October 2024 ，
Scan QR Code
Peng Qiang,Chen Hongwen,He Yinhao,et al.Research Progress of 3D Printing Technology in Anterior Cruciate Ligament Reconstruction[J].Biomedical Data Science,2024,04(03):15-23.
Peng Qiang,Chen Hongwen,He Yinhao,et al.Research Progress of 3D Printing Technology in Anterior Cruciate Ligament Reconstruction[J].Biomedical Data Science,2024,04(03):15-23. DOI： 10.47297/wspbdsWSP2752-630503.20240403.
With the improvement of living standards
people are paying more and more attention to sports exercise. The incidence of anterior cruciate ligament (ACL) rupture has been increasing in recent years
and the age of onset is also becoming younger. The treatment effect is also increasingly concerned
which directly affects the quality of life of patients. At present
the main treatment method for ACL is arthroscopic reconstruction of the anterior cruciate ligament
and with the emergence of 3D printing technology
it has brought a new direction for the anterior cruciate ligament of the knee joint. To explore the latest research progress of 3D printing technology applied to the repair and reconstruction of the anterior cruciate ligament. 3D printing technology used for tunnel positioning in ACL reconstruction is superior to traditional tunnel positioning. 2). The preoperative simulation plan applied by 3D printing technology in ACL reconstruction can effectively reduce the time during surgery
thereby avoiding postoperative complications caused by repeated operations during surgery
and greatly improving the success rate of surgery for beginners. 3). 3D printing technology is currently more used in animal experiments in the field of tissue engineering research in ACL reconstruction
and there is less clinical application
lacking clinical data support. 4). At present
there are more reports on the short-term curative effect of 3D printing technology applied to the reconstruction of ACL rupture
and there is a lack of long-term curative effect follow-up results. 5). The application of 3D printing technology in the whole process of ACL reconstruction has great potential value.
3D printingAnterior cruciate ligament reconstruction3D printed preoperative planning model3D printed intraoperative navigation templateTunnel positioningTissue engineering
3rdMather RC, Koenig L, Kocher MS, et al. Societal and economic impact of anterior cruciate ligament tears. J Bone Joint Surg Am. 2013;95(19):1751-1759.
Vacek PM, Slauterbeck JR, Tourville TW, et al. Multivariate Analysis of the Risk Factors for First-Time Noncontact ACL Injury in High School and College Athletes: A Prospective Cohort Study With a Nested, Matched CaseControl Analysis. Am J Sports Med. 2016;44(6):1492-1501
Alemayehu DG, Zhang Z, Tahir E, Gateau D, Zhang DF, Ma X. Preoperative Planning Using 3D Printing Technology in Orthopedic Surgery. Biomed Res Int. 2021 Oct 12;2021:7940242. doi: 10.1155/2021/7940242. PMID: 34676264; PMCID:http://dx.doi.org/10.1155/2021/7940242.PMID:34676264;PMCID:PMC8526200.
Ni J, Li D, Mao M, et al. A method of accurate bone tunnel placement for anterior cruciate ligament reconstruction based on 3-dimensional printing technology: a cadaveric study[J]. Arthroscopy: The Journal of Arthroscopic & Related Surgery, 2018, 34(2): 546-556.
Galvez M, Asahi T, Baar A, et al. Use of three-dimensional printing in orthopaedic surgical planning[J]. Journal of the American Academy of Orthopaedic Surgeons. Global Research & Reviews, 2018, 2(5).
Zhi L Q, Li M, Liu K, et al. Advanced 3D rapid prototyping biomodeling technique for knee surgery[J]. Journal of Mechanics in Medicine and Biology, 2015, 15(06): 1540050.
Rahman M, Murad G J A, Mocco J. Early history of the stereotactic apparatus in neurosurgery[J]. Neurosurgical focus, 2009, 27(3): E12.
Muneta T, Sekiya I, Yagishita K, et al. Two-bundle reconstruction of the anterior cruciate ligament using semitendinosus tendon with endobuttons: operative technique and preliminary results[J]. Arthroscopy: The Journal of Arthroscopic & Related Surgery, 1999, 15(6): 618-624.
Ferretti M, Ekdahl M, Shen W, et al. Osseous landmarks of the femoral attachment of the anterior cruciate ligament: an anatomic study[J]. Arthroscopy: The Journal of Arthroscopic & Related Surgery, 2007, 23(11): 1218-1225.
Jorge P B, Escudeiro D, Severino N R, et al. Positioning of the femoral tunnel in anterior cruciate ligament reconstruction: functional anatomical reconstruction[J]. BMJ Open Sport & Exercise Medicine, 2018, 4(1): e000420.
Goble E M, Downey D J, Wilcox T R. Positioning of the tibial tunnel for anterior cruciate ligament reconstruction[J]. Arthroscopy: The Journal of Arthroscopic & Related Surgery, 1995, 11(6): 688-695.
Harner C D, Fu F H, Irrgang J J, et al. Anterior and posterior cruciate ligament reconstruction in the new millennium: a global perspective[J]. Knee Surgery, Sports Traumatology, Arthroscopy, 2001, 9(6): 330-336.
Nakamura K, Nakamura T, Horie M, Katagiri H, Otabe K, Nakagawa Y, Amemiya M, Sekiya I, Muneta T, Koga H. Anatomic femoral tunnel placement is difficult by the transtibial technique: comparison of three different femoral tunnel drilling techniques in double-bundle anterior cruciate ligament reconstructions. Knee Surg Sports Traumatol Arthrosc. 2020 Feb;28(2):584-593. doi: 10.1007/s00167-019-05740-8http://dx.doi.org/10.1007/s00167-019-05740-8. Epub 2019 Oct 14. PMID: 31612263.
Burnham JM, Malempati CS, Carpiaux A, Ireland ML, Johnson DL. Anatomic Femoral and Tibial Tunnel Placement During Anterior Cruciate Ligament Reconstruction: Anteromedial Portal All-Inside and Outside-In Techniques. Arthrosc Tech. 2017 Mar 6;6(2):e275-e282. doi: 10.1016/j.eats.2016.09.035. PMID: 28580242; PMCID:http://dx.doi.org/10.1016/j.eats.2016.09.035.PMID:28580242;PMCID:PMC5442353.
Lee SR, Jang HW, Lee DW, Nam SW, Ha JK, Kim JG. Evaluation of femoral tunnel positioning using 3-dimensional computed tomography and radiographs after single bundle anterior cruciate ligament reconstruction with modified transtibial technique. Clin Orthop Surg. 2013;5(3):188-194. doi:10.4055/cios.2013.5.3.188http://dx.doi.org/10.4055/cios.2013.5.3.188
Vermeijden, HD, Yang, XA, van der List, JP, et al. Trauma and femoral tunnel position are the most common failure modes of anterior cruciate ligament reconstruction: a systematic review. KNEE SURG SPORT TR A. 2020; 28 KNEE SURG SPORT TR A. doi: 10.1007/s00167-020-06160-9http://dx.doi.org/10.1007/s00167-020-06160-9
Zee MJM, Pijpker PAJ, Kraeima J, Viddeleer AR, Diercks RL. Patient specific instrumentation in ACL reconstruction: a proof-of-concept cadaver experiment assessing drilling accuracy when using 3D printed guides. Arch Orthop Trauma Surg. 2024;144(1):289-296. doi:10.1007/s00402-023-05072-whttp://dx.doi.org/10.1007/s00402-023-05072-w
Rankin I, Rehman H, Frame M. 3D-Printed Patient-Specific ACL Femoral Tunnel Guide from MRI. Open Orthop J. 2018 Feb 28;12:59-68. doi: 10.2174/1874325001812010059. PMID: 29541271; PMCID:http://dx.doi.org/10.2174/1874325001812010059.PMID:29541271;PMCID:PMC5842381.
Chen, T, Chen, J, Li, X, et al. A comparative study on 3D printing-assisted arthroscopic IDEAL point femoral tunnel positioning for anterior cruciate ligament reconstruction versus conventional arthroscopic positioning. BMC Musculoskelet Disord. 2024; 25 BMC Musculoskelet Disord. doi: 10.1186/s12891-024-07591-yhttp://dx.doi.org/10.1186/s12891-024-07591-y
Wang, X, Wang, D, Zhang, C, et al. Study on the use of 3D printed guides in the individualized reconstruction of the anterior cruciate ligament. BMC Musculoskelet Disord. 2024; 25 BMC Musculoskelet Disord. doi: 10.1186/s12891-024-07234-2http://dx.doi.org/10.1186/s12891-024-07234-2
Lan, X, Huang, J, Tian, F, et al. Application of 3D-Printed Personalized Guide for Lateral Femoral Positioning in Anterior Cruciate Ligament Reconstruction of the Knee. ALTERN THER HEALTH M. 2023; 29 ALTERN THER HEALTH M. PMID: 37499157Mauch F, Apic G, Becker U,et al. Differences in the placement of the tibial tunnel during reconstruction of the anterior cruciate ligament with and without computer-assisted navigation[J]. The American Journal of Sports Medicine, 2007, 35(11): 1824-1832.
Mauch F, Apic G, Becker U, et al. Differences in the placement of the tibial tunnel during reconstruction of the anterior cruciate ligament with and without computer-assisted navigation[J]. The American Journal of Sports Medicine, 2007, 35(11): 1824-1832.
Desai, VS, Anderson, GR, Wu, IT, et al. Anterior Cruciate Ligament Reconstruction With Hamstring Autograft: A Matched Cohort Comparison of the All-Inside and Complete Tibial Tunnel Techniques. Orthop J Sports Med. 2019; 7 (1): 2325967118820297. doi: 10.1177/2325967118820297http://dx.doi.org/10.1177/2325967118820297
Chartrain N A, Gilchrist K H, Ho V B, et al. 3D bioprinting for the repair of articular cartilage and Osteochondral tissue[J]. Bioprinting, 2022: e00239.
Zhang Wenyou,He Jiankang,Li Xiang,Liu Yaxiong,Bian Weiguo,Li Dichen,Jin Zhongmin. [Fabrication and in vivo implantation of ligament-bone composite scaffolds based on three-dimensional printing technique].[J]. Zhongguo xiu fu chong jian wai ke za zhi = Zhongguo xiufu chongjian waike zazhi = Chinese journal of reparative and reconstructive surgery,2014,28(3).
Park S H, Choi Y J, Moon S W, et al. Three-dimensional bio-printed scaffold sleeves with mesenchymal stem cells for enhancement of tendon-to-bone healing in anterior cruciate ligament reconstruction using soft-tissue tendon graft[J]. Arthroscopy: The Journal of Arthroscopic & Related Surgery, 2018, 34(1): 166-179.
Goradia VK. Editorial Commentary: Three-Dimensional Printing and Stem Cells May Be a Game Changer for Recovery After Anterior Cruciate Ligament Reconstruction. Arthroscopy. 2018 Jan;34(1):180-181. doi: 10.1016/j.arthro.2017.08.239http://dx.doi.org/10.1016/j.arthro.2017.08.239. PMID: 29304962.
Kajave NS, Schmitt T, Nguyen TU, Gaharwar AK, Kishore V. Bioglass incorporated methacrylated collagen bioactive ink for 3D printing of bone tissue. Biomed Mater. 2021 Feb 26;16(3):10.1088/1748-605X/abc744. doi: 10.1088/1748-605X/abc744. PMID: 33142268; PMCID:http://dx.doi.org/10.1088/1748-605X/abc744.PMID:33142268;PMCID:PMC8326306.
Cao Y, Yang S, Zhao D, Li Y, Cheong SS, Han D, Li Q. Three-dimensional printed multiphasic scaffolds with stratified cell-laden gelatin methacrylate hydrogels for biomimetic tendon-to-bone interface engineering. J Orthop Translat. 2020 Feb 8;23:89-100. doi: 10.1016/j.jot.2020.01.004. PMID: 32514393; PMCID:http://dx.doi.org/10.1016/j.jot.2020.01.004.PMID:32514393;PMCID:PMC7267011.
Lacombe, J, Cooke, M, Park, H, et al. Primary Human Ligament Fibroblast Adhesion and Growth on 3D-Printed Scaffolds for Tissue Engineering Applications Surgeries (Basel). 2024; 4 Surgeries (Basel). doi: 10.3390/surgeries4020021http://dx.doi.org/10.3390/surgeries4020021
White R A, Weber J N, White E W. Replamineform: a new process for preparing porous ceramic, metal, and polymer prosthetic materials[J]. science, 1972, 176(4037): 922-924.
Lim T C, Chian K S, Leong K F. Cryogenic prototyping of chitosan scaffolds with controlled micro and macro architecture and their effect on in vivo neo‐vascularization and cellular infiltration[J]. Journal of Biomedical Materials Research Part A, 2010, 94(4): 1303-1311.
Hing K A, Annaz B, Saeed S, et al. Microporosity enhances bioactivity of synthetic bone graft substitutes[J]. Journal of Materials Science: Materials in Medicine, 2005, 16(5): 467-475.
Huang Y M, Huang C C, Tsai P I, et al. Three-dimensional printed porous titanium screw with bioactive surface modification for bone–tendon healing: a rabbit animal model[J]. International journal of molecular sciences, 2020, 21(10): 3628.
Wang, Y, Ren, C, Bi, F, et al. The hydroxyapatite modified 3D printed poly L-lactic acid porous screw in reconstruction of anterior cruciate ligament of rabbit knee joint: a histological and biomechanical study. BMC Musculoskelet Disord. 2023; 24 BMC Musculoskelet Disord. doi: 10.1186/s12891-023-06245-9http://dx.doi.org/10.1186/s12891-023-06245-9
Related Articles
Related Author
Related Institution
京公网安备11010802024621