Algorithmic analysis of the microstructure of aluminum alloy

Chang Liang

doi:10.47297/wspeiWSP2516-253516.20250901

PDF
Export
Share
Collection
Album

Algorithmic analysis of the microstructure of aluminum alloy

Volume 9, Issue 1

Views: 0 Downloads: 0

Algorithmic analysis of the microstructure of aluminum alloy
Algorithmic analysis of the microstructure of aluminum alloy
National Technical University, Kharkiv, Ukraine, 61000
Vol. 9, Issue 1, Pages: 88-91(2025)
Published：25 February 2025
DOI：10.47297/wspeiWSP2516-253516.20250901
Accepted：

Scan QR Code

Chang Liang.Algorithmic analysis of the microstructure of aluminum alloy[J].Entrepreneurship and Innovation,2025,09(01):88-91.
DOI：

Chang Liang.Algorithmic analysis of the microstructure of aluminum alloy[J].Entrepreneurship and Innovation,2025,09(01):88-91. DOI： 10.47297/wspeiWSP2516-253516.20250901.

摘要

Abstract

In this paper

the microstructure and mechanical properties of aluminum alloy materials were studied. The microstructure simulation program of Voronoi algorithm was written with Python

and the program was imported into ABAQUS finite element software to establish the grain model of aluminum alloy. The finite element model of grain structure was established. The results show that the stress concentration coefficient of a single inclusion particle decreases first and then increases with the increase of elastic modulus. Compared with a single inclusion particle

the stress concentration of two inclusion particles will increase

and the shape

quantity and distribution of inclusion particles have influence on the microstructure stress concentration.

关键词

Keywords

references

Bian G , Chen Y , et al . Microstructural mechanism fatigue crack nucleation and propagation of 2A12 aluminum alloy [J ] . Chinese Journal of Materials Research , 2012 : 26 ( 5 ): 521 - 526 .

Liu D , Xie Y , et al . Influence of process parameters creep age forming formability of 7075 aluminum alloy sheet [J ] . Materials Science and Technology , 2015 : 23 ( 3 ): 50 - 56 .

Liao M . Probabilistic modeling of fatigue related microstructural parameters in alloys [J ] . Engineering Failure Mechanics , 2009 : 76 , 668 - 680 .

Mcdowell D L , Dunne F P E . Microstructure-sensitive computational modeling of fatigue crack formation [J ] . International Journal of Fatigue , 2010 , 32 ( 9 ): 1521 - 1542 .

Li J X , Zhai T , et al . Four-point-bend fatigue of AA2026 aluminum alloys [J ] . Metallurgical and Materials Transactions A , 2005 , 36 : 2529 - 2549 .

Wang X , Tang B , et al . In-site observation technology and application of fatigue crack initiation and propagation for cast magnesium alloys [J ] . Materials for Mechanical Engineer . 2006 : 30 ( 2 ): 1 - 5 .

Alert me when the article has been cited

Submit

No data

Related Author

No data

Related Institution

No data

⁰