Li X., Mo H., Li S.S., et al. (2016) Research Progress on Process Control Issues in 3D Printing Technology [J]. Acta Automatica Sinica, 42(07): 983-1003.

Associates,W.(2014) Wohlers Report 2014 Uncovers Annual Growth of 34.9% for 3D Printing and Additive Manufacturing Industry. http://wohlersassociates.com/press63.html (accessed Sept 29, 2015).

Laghi, V., Savino, E., Gasparini, G. (2015) Reduction of the environmental impact of complex-shaped steel joints through topology optimization and large-scale metal 3D printing. https://doi.org/10.1016/j.rineng.2025.105610 Volume 27, 105610.

Wu, Y.H., Zhao, C.L., Ha, Y., Sun, J.P., Li, Z.M., Zu, G.Q., Zhu, W.W., Ran, X. (2024) A new SLM-manufactured Al-Si alloy with excellent room and elevated-temperature mechanical properties. https://doi.org/10.1016/j.jmapro.2024.11.051 Volume 133, Pages 25-32.

Yang, R.T. (2023) Research on Structural Topology Optimization Design Considering 3D Printing Residual Deformation [D]. Fujian Institute of Engineering.

Blok, L.G., Longana, M.L., Yu, H., Woods, B.K.S. An investigation into 3D printing of fibre reinforced thermoplastic composites. https://doi.org/10.1016/j.addma.2018.04.039 Volume 22, August 2018, Pages 176-186.

Ghabezi, P., Sam-Daliri, O., Flanagan, T., Walls, M., Harrison, N.M. (2025) Mechanical and microstructural analysis of glass Fibre-Reinforced high density polyethylene thermoplastic waste composites manufactured by material extrusion 3D printing technology. https://doi.org/10.1016/j.compositesa.2025.108930 Volume 194, 108930.

Zhao, Y., Sun, M.C., Zhang, S.Y., et al. (2022) Research progress on continuous carbon fiber-reinforced high-performance thermoplastic composites[J]. Acta Materiae Compositae Sinica, 39(09): 4274-4285.

Ning, F.D., Cong, W.L., Qiu, J.J., Wei, J.H., Wang, S. (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. https://doi.org/10.1016/j.compositesb.2015.06.013Get rights and content Volume 80, Pages 369-378.

Zhou, J.M. (2024) Research on Influencing Factors and Suppression Methods of Warping Deformation in 3D Printing of C-CFRTP [D]. Dalian University of Technology, 2024.

Chen, K.M. (2023) Research on Thermal Deformation Optimization of 3D Printed Structural Components Based on Process Parameter Control [D]. Southwest Jiaotong University.

Donaldson, L. (2022) New 3D printing technique reduces part deformation. https://doi.org/10.1016/j.mattod.2022.05.013 Volume 56, Pages 3-4.

Yu, L, T. (2024) Research on the Solidification Deformation of 3D Printed Continuous Fiber Reinforced Composite Reinforced Panels [D]. Chongqing: Chongqing Jiaotong University.