Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring

Xinyi Chen; Yi Yang

doi:10.47297/taposatWSP2633-456926.20260708

PDF
导出
分享
收藏
专辑

Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring

7卷第8期

浏览量: 0 Downloads: 0

Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring
Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring
1.University of Shanghai for Science and Technology, Shanghai, 200093, China
2.Nanjing Institute of Technology, Nanjing, Jiangsu, 211167, China
2026年7卷第8期页码：132-135
纸质出版：2026-08-30
DOI：10.47297/taposatWSP2633-456926.20260708
Accepted：

Scan QR Code

Xinyi Chen & Yi Yang. (2026). Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring. 科技理论与实践（英文版）, 7(8), 132-135.

Chen Xinyi,Yang Yi.Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring[J].Theory and Practice of Science and Technology,2026,07(08):132-135.
Xinyi Chen & Yi Yang. (2026). Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring. 科技理论与实践（英文版）, 7(8), 132-135. DOI： 10.47297/taposatWSP2633-456926.20260708.

Chen Xinyi,Yang Yi.Design of Integrated Current Transformer for Measurement and Energy Harvesting in Distribution Line Monitoring[J].Theory and Practice of Science and Technology,2026,07(08):132-135. DOI： 10.47297/taposatWSP2633-456926.20260708.

摘要

Abstract

To meet the needs for current measurement and autonomous power supply in distributed distribution-line monitoring nodes

this paper designs an integrated current transformer for measurement and energy harvesting. The device uses one magnetic core and one secondary winding. The primary has one turn and the secondary has 600 turns. Mode switching enables time-multiplexed energy harvesting and current measurement. During normal operation

the secondary winding is connected to the energy-harvesting path for 10 s. The circuit performs rectification

energy storage

and power management. It then switches to the measurement path for 5 s. A 50 mΩ sampling resistor converts the secondary current into a voltage signal. A 24-bit analog-to-digital converter samples the signal at 4 kS/s. A sinusoidal fit is used to extract the voltage amplitude. A calibration relationship converts the amplitude into the primary current

and the result is transmitted through LoRa. Experiments show that the energy-harvesting module completes energy storage

load connection

overvoltage cutoff

and recovery at a primary current of 35.3 A. From 50 to 600 A at 50 Hz

the maximum relative indication error is 0.32%. In an open line-of-sight environment

the wireless communication distance is about 490 m. The device uses the same current transformer for time-multiplexed energy harvesting

current measurement

and wireless data transmission. It can be used for distributed online monitoring of distribution lines.

关键词

Keywords

references

RIBA J-R, MORENO-EGUILAZ M, BOGARRA S. Energy harvesting methods for transmission lines: A comprehensive review[J]. Applied Sciences, 2022, 12(21): 10699.

WANG Y, REN C, KONG J, et al. A comprehensive design method of an active electronic current transformer for stable energy harvesting from power lines[J]. IET Power Electronics, 2023, 16(11): 1828-1837.

LIU L, WEN X, SHI R, et al. High-efficiency magnetic field energy harvesting from a three-core cable[J]. Sensors and Actuators A: Physical, 2023, 360: 114501.

NOOHI M S, HABIBI M. A low power impedance matching PWM generator for long distance energy harvesting from overhead power transmission lines[J]. Electrical Engineering, 2022, 104(5): 3361-3380.

QIAN J, XU J. Enhanced power-line energy harvesting by capacitance compensation for remote self-powered CO2 monitoring[J]. AIP Advances, 2025, 15(2): 025019.

CHEN Q, XU J, LIU W, et al. Highly efficient power-line energy harvesting with adaptive matching capacitance for residential self-powered sensing[J]. IEEE Transactions on Instrumentation and Measurement, 2025, 74: 2002712.

ZHOU K, WANG X, WANG L, et al. Self-powered wireless sensing system with cylindrical high voltage side electric field energy harvesting by discharge circuit[J]. Sensors and Actuators A: Physical, 2024, 380: 116047.

LI W, WANG K, QIU J, et al. Self-powered powerline monitor with strong anti-interference based on Maxwell's displacement current-driven LED[J]. Nano Energy, 2024, 123: 109378.

WU H, WANG J, WU Z, et al. Multi-parameter optimized triboelectric nanogenerator based self-powered sensor network for broadband aeolian vibration online-monitoring of transmission lines[J]. Advanced Energy Materials, 2022, 12(13): 2103654.

WANG D, HUANG X, XIANG X, et al. High-performance self-powered sensing system for power grid applications[J]. Advanced Sensor Research, 2026, 5(3): e00189.

LIM T, KIM Y. Compact self-powered wireless sensors for real-time monitoring of power lines[J]. Journal of Electrical Engineering & Technology, 2019, 14(3): 1321-1326.

CHEN H, QIAN Z, LIU C, et al. Time-multiplexed self-powered wireless current sensor for power transmission lines[J]. Energies, 2021, 14(6): 1561.

IEC 61869-1:2023. Instrument transformers-Part 1: General requirements[S]. Geneva: International Electrotechnical Commission, 2023.

IEC 61869-2:2012. Instrument transformers-Part 2: Additional requirements for current transformers[S]. Geneva: International Electrotechnical Commission, 2012.